The ISM-MT9M131-Color integrates Aptinas MT9M131 image SoC (System-on-a-Chip), oscillator, voltage control and a M12 or CS-mount lens-holder to support numerous M12 or CS-mount lenses at a size of 40 x 40mm.
The MT9M131 CMOS digital image sensor from Aptina has an active-pixel-array of 1280H x 1024V (1.3MP). It is an ultra low power, cost effective, progressive scan image sensor with a completely integrated camera system (SoC) which has superior low-light performance. The sensor can be programmed via a simple I²C interface and offers some sophisticated camera functions such as auto exposure control, auto white balance (AWB), auto black reference (ABR), auto flicker avoidance, auto color saturation, auto defect identification and correction. The sensor is able to capture in continuous mode for videos or single frame mode for clear sharp images for both low light and normal scenes. |
| Features of ISM-MT9M131-Color |
| OPTICAL FORMAT |
1/3-inch (5:4) |
| ACTIVE ARRAY |
1280H x 1024V(1.3MP) |
| IMAGING AREA |
4.6mm(H) x 3.7mm(V) |
| PIXEL SIZE |
3.6 x 3.6μm |
| RESPONSIVITY |
1.0 V/lux-sec (550nm) |
| SNR MAX |
44dB |
| MAX DYNAMIC RANGE |
71dB |
| FRAME RATE |
15fps at 50 MHz (SXGA 1280 x 1024)
30fps at 50 MHz (VGA 640 x 480)
60fps at 50MHz (640 x 512)
|
| CHROMA |
RGB Bayer pattern |
| SHUTTER TYPE |
ERS - Electronic Rolling Shutter |
| DATA RATE |
27Mb/s |
INPUT CLOCK
|
50MHz |
| MASTER CLOCK |
50MHz |
| ADC RESOLUTION |
10-bit, dual on-chip |
| DATA FORMAT |
10-bit parallel |
| SUPPLY VOLTAGE |
Power supply 2.5V – 3.1V
I/O digital reference 1.7V – 3.1V |
| POWER CONSUMPTION |
170mW SXGA at 15 fps (54 MHz EXTCLK)
90mW VGA at 30 fps (54 MHz EXTCLK) |
| OPERATING TEMPERATURE |
–30°C to +70°C |
| RoHS COMPLIANT |
Yes |
| BLT-ISM-CONNECTOR |
Yes |
| M12-MOUNT COMPATIBLE |
Yes |
| CS-MOUNT COMPATIBLE |
Yes |
| SIZE |
40 x 40mm |
| ADDITIONAL INFORMATION |
On-Board core voltage regulator
On-Board oscillator
Features BLT-ISM-Connector |
|
ISM-MT9M131
|
| Package Content |
ISM-MT9M131 only
M12 mount, CS mount, lens and ISM connector cable can be bought separately.
|
|
|
| Order No. |
Productname |
Specification |
Status |
 |
100-3202-2 |
Image Sensor Module ISM-MT9M131-Color |
Standard version |
available prices ordering |
|
100-9043 |
Lens holder M12 x 0,5 18mm |
Standard version |
available prices ordering |
|
100-9103 |
ZIF cable 30 pins, 50mm for ISM
|
Standard version |
available prices ordering |
|
100-9104 |
ZIF cable 30 pins, 150mm for ISM |
Standard version |
available prices ordering |
For the Product Revision History please see the Revision Report
For general support visit our support site
For prices please see our price list
|